Process
CO₂ Laser
Laser Cutting & Engraving in Altamira and Tampico
CO₂ laser for acrylic, wood, MDF, leather, and textiles. Signs, wayfinding, display pieces, and technical marking in Altamira, Tampico, and Ciudad Madero.
CONTACT-FREE CUTTING
Clean edge, no sanding required.
The laser cuts with heat, not with a blade: there is no tool pushing the part or vibration that chips the edge. In acrylic, the edge comes out factory-clear, and in wood, there are no burrs to remove.
Thickness
Material-dependent
Vector Cutting
Complex geometric profiles with a sealed edge, without burrs or deformation. The laser does not push the material, so it can reach fine details where a cutting tool wouldn't fit.
Acrylic, wood, MDF, plywood, leather, and textiles
Engraving & Marking
Permanent marking for data plates, traceability codes, logos, and panel lettering. It doesn't rub off with use because it's not ink: it's the surface itself.
Engraving on stainless steel, anodized aluminum, and wood
Display Pieces
Signs, store signage, organizers, and acrylic countertop displays. They are cut and engraved in the same pass.
From 1 piece, no minimum order
Materials the laser cuts and engraves
On metals, the CO₂ laser is used for engraving, not cutting. If you need to machine aluminum or engineering plastics, that is done with the CNC router.
Optical Acrylic
Hardwood
High-Density MDF
Plywood
Leather
Textiles
Paper & Cardboard
Metals (Engraving only)
Frequently asked questions
The CO₂ laser cutter is located at Honorato Tavera 202A, Zona Centro, Altamira, Tamaulipas, C.P. 89600. We cut and engrave for industries, businesses, and individuals in Altamira, Tampico, and Ciudad Madero, starting from a single piece.
It cuts and engraves acrylic, wood, MDF, plywood, leather, fabric, and paper. For metals, it is used for engraving, not cutting: metal machining is done with the CNC router.
Yes. The laser seals the edge as it cuts, so acrylic edges come out clear and transparent, requiring no sanding or polishing afterward.